RotaChock®
개발 RotaChock®
모든 알려진 기술은 두 가지 기본 목표를 가지고 있습니다: 평평한 장착 표면을 만들고 기계 발판에서 힘을 기초로 전달하는 것입니다. 그러나, 우리의 세 번째 목표는 나중에 조정할 수 있는 Soft-Foot를 방지하는 솔루션을 설계하는 것이었습니다. 그래서 우리는 기계적인 촉매를 발전시키기 위해 기술을 결합하고, Soft-Foot를 종료하기 위한 기술적으로 우수한 갭 필러를 자랑스럽게 제시합니다.
RotaChock® BasicLine
RotaChock® BasicLine은 회전 및/또는 중요하게 정렬된 모든 유형의 기계 장비에 대한 강한, 조절 가능하고 자동 수평 조절이 가능한 장착 쵸크입니다.
→ 자세한 정보
RotaChock® SlimLine
RotaChock® BasicLine이 사용 가능한 갭 높이에 맞지 않는 경우 20mm부터 RotaChock® SlimLine을 사용하십시오.
→ 자세한 정보
RotaChock® Mounting Plate
RotaChock® 마운팅 플레이트는 신축성 마운트 설치를 위한 에폭시 수지 또는 맞춤형 강철 쵸크 대안을 제공합니다.
→ 자세한 정보
RotaChock®는 회전 장비를 부착하기 위한 조절 가능하고 자가 수평 조절되며 재사용 가능한 쵸크입니다. RotaChock®는 엔지니어링과 수년간의 현장 경험의 결합으로 인해 강력하고 강하며 우아한 갭 채우기 장치로 기계의 소프트-풋 문제를 해결합니다. RotaChock®는 주요 쵸크 목표를 달성하며 산업에서 무적의 추가 조절 기능을 갖추고 있습니다.

RotaChock®는 3 부분으로 구성됩니다:

볼록한 표면이 있는 상부 링은 오목한 중간 링에 놓여 있습니다.
가운데 링에는 수컷 스레드와 위쪽에 오목한 동굴이 있습니다.
여성 스레드가있는 하부 링
나사 부분은 쵸크의 조절 가능성을 제공하여 평행한 소프트-풋 문제를 해결합니다.
구형 상단은 최대 4°까지의 각도 차이를 수용하며 각도 소프트 풋을 해결합니다.
어떻게 작동합니까?
RotaChock®의 작동 방식은 비교적 간단합니다: 기초 볼트가 RotaChock®의 중앙 구멍을 통과하여 기계 발판, RotaChock® 및 기초의 상판을 안전하게 함께 클램핑합니다. 장비의 재조정이 필요할 때, 기초 볼트를 풀고 RotaChock®을 조정하여 목표 정렬을 맞추면 됩니다. 이 조정 기능은 산업에서 무적입니다. RotaChock® 사용은 다른 쵸킹 솔루션과 비교했을 때 다음과 같은 이점을 제공합니다:

모든 혜택 보기

  • RotaChock® is installed quickly. A machine set up on a RotaChock® can generally be realigned and secured an hour. When using epoxy resins, it takes at least three days for the machinery to function again due to the resin's relatively long curing time of 36-48 hours. When using steel-fitted blocks, measuring the gap, milling the steel chock, and the welding process will take several days.

  • RotaChock® main benefit is serviceability, thanks to the adjustability feature. Corrections and adjustments in realignment are always directly possible. When using epoxy resins or steel-fitted blocks, you need to cut out the epoxy resin or remove the steel block and redo the entire lengthy and costly process.

  • RotaChock® has a spherical top part that ensures the best possible contact surface, even if the foundation and the machine foot are not parallel. The RotaChock® is also height-adjustable. The combination of these two features prevents Soft-Foot.

  • RotaChock® is user-friendly; no special skills are required for installation. Unlike epoxy resins, no certified people are needed for the installation job to retain a warranty. For the local procedure of measuring, correcting, blue-fitting, and machining steel-fitted blocks, experienced and patient millers are required.

  • RotaChock® is eco-friendly; epoxy resins contain mixed and aggressive chemical components which are dangerous for the users. RotaChock® is also adjustable thus reusable.

  • RotaChock® behaves like a solid steel chock, and RotaChock® allows the foundation bolt to be tensioned to any required torque. In contrast, epoxy resins have a maximum load of 5 N/mm2. This relatively low torque often results in almost loose foundation bolts.

  • RotaChock® is a standard designed solution with a corresponding adjustability range. No need for extensive engineering work or Mona Lisa projects. You can gill the gap with one solution. In comparisson: steel-fitted blocks need to be measured separately and machined for each gap height.

  • RotaChock® requires no heating; heat could influence the alignment target negatively. Epoxy resins need to be heated to cure, and steel-fitted blocks need to be welded to the foundation.

  • RotaChock® competitive edge is its large footprint: the surface area of the bottom ring in contact with the foundation is larger, so the pressure exerted on that surface is lower. RotaChock® also uses a buttress thread design. These features allow RotaChock® to carry greater loads.

주로 다음과 같은 이유로 RotaChock®이 회전 장비에 가장 적합한 수명 주기 솔루션이라고 생각합니다:

  • RotaChock®은 소프트 풋을 제거합니다.
  • RotaChock®은 조정이 가능하여 필요할 때마다 정렬 및 재조정이 가능합니다.
  • 다른 초킹 옵션에 비해 시간과 비용을 절약할 수 있습니다.

해양에서 원자력 프로젝트에 이르기까지 다양한 산업 분야에서 수백만 개의 조절식 초크가 설치되어 사용되고 있습니다. 당사의 포트폴리오를 확인하고 RotaChock®으로 공백을 메울 수 있는 진보적인 결정을 내려보세요.