RotaChock®
Entwicklung von Rotachock®
Alle bekannten Techniken haben zwei grundlegende Ziele: die Schaffung einer ebenen Montagefläche und die Übertragung von Kräften von den Maschinenfüßen auf das Fundament. Unser drittes Ziel war es jedoch, eine Lösung zur Verhinderung von Soft-Foot zu entwerfen, die später noch angepasst werden kann. Deshalb haben wir Technologien kombiniert, um die mechanische Verkeilung weiterzuentwickeln, und wir präsentieren stolz einen technisch überlegenen Spaltfüller, um Soft-Foot zu beenden.
RotaChock® BasicLine
RotaChock® BasicLine ist ein steifer, verstellbarer und selbstnivellierender Montagekeil für alle Arten von rotierenden und/oder kritisch ausgerichteten Maschinenanlagen.
→ MEHR INFORMATIONEN
RotaChock® SlimLine
In Fällen, in denen die RotaChock® BasicLine nicht in die verfügbare LÜCKEN-Höhe passt, erhalten Sie die RotaChock® SlimLine ab 20 mm.
→ MEHR INFORMATIONEN
RotaChock® Mounting Plate
Die RotaChock® Montageplatte bietet eine verstellbare Alternative zu Epoxidharz oder maßgeschneiderten Stahlkeilen für die Installation von elastischen Lagern.
→ MEHR INFORMATIONEN
Der RotaChock® ist ein verstellbarer, selbstnivellierender und wiederverwendbarer Keil zur Befestigung rotierender Ausrüstung. Der RotaChock® ist eine Mischung aus Ingenieurwesen und jahrelanger Felderfahrung, die zu einem robusten, steifen und eleganten Spaltfüller geführt hat, um das Soft-Foot-Problem von Maschinen zu beenden. RotaChock® erreicht die primären Keilziele sowie unser zusätzliches Verstellbarkeitsmerkmal, das in der Branche unübertroffen ist.

RotaChock® besteht aus 3 Teilen:

Oberring mit einer konvexen Oberfläche, die im konkaven Mittelring ruht.
Mittlerer Ring mit einem männlichen Gewinde und einer konkaven Vertiefung oben.
Unterer Ring mit einem weiblichen Gewinde
Der Gewindeteil ermöglicht die Einstellbarkeit des Spannschlittens, was das parallele Soft-Foot-Problem löst.
Die kugelförmige Spitze ermöglicht Winkelunterschiede von bis zu 4° und löst das Problem des Winkelfußes.
Wie funktioniert es?
Die Funktionsweise von RotaChock® ist relativ einfach: Ein Fundamentsbolzen läuft durch das mittlere Loch des RotaChock®, klemmt den Maschinenfuß, den RotaChock® und die obere Platte des Fundaments sicher zusammen. Wenn eine Neuausrichtung Ihrer Ausrüstung erforderlich ist, lösen Sie einfach die Fundamentsbolzen und justieren Sie den RotaChock®, um Ihre Zielausrichtung zu erreichen. Dieses Einstellungsmerkmal ist in der Branche unübertroffen. Die Verwendung von RotaChock® bietet im Vergleich zu anderen Unterlegkeillösungen folgende Vorteile:

Alle Vorteile anzeigen

  • RotaChock® is installed quickly. A machine set up on a RotaChock® can generally be realigned and secured an hour. When using epoxy resins, it takes at least three days for the machinery to function again due to the resin's relatively long curing time of 36-48 hours. When using steel-fitted blocks, measuring the gap, milling the steel chock, and the welding process will take several days.

  • RotaChock® main benefit is serviceability, thanks to the adjustability feature. Corrections and adjustments in realignment are always directly possible. When using epoxy resins or steel-fitted blocks, you need to cut out the epoxy resin or remove the steel block and redo the entire lengthy and costly process.

  • RotaChock® has a spherical top part that ensures the best possible contact surface, even if the foundation and the machine foot are not parallel. The RotaChock® is also height-adjustable. The combination of these two features prevents Soft-Foot.

  • RotaChock® is user-friendly; no special skills are required for installation. Unlike epoxy resins, no certified people are needed for the installation job to retain a warranty. For the local procedure of measuring, correcting, blue-fitting, and machining steel-fitted blocks, experienced and patient millers are required.

  • RotaChock® is eco-friendly; epoxy resins contain mixed and aggressive chemical components which are dangerous for the users. RotaChock® is also adjustable thus reusable.

  • RotaChock® behaves like a solid steel chock, and RotaChock® allows the foundation bolt to be tensioned to any required torque. In contrast, epoxy resins have a maximum load of 5 N/mm2. This relatively low torque often results in almost loose foundation bolts.

  • RotaChock® is a standard designed solution with a corresponding adjustability range. No need for extensive engineering work or Mona Lisa projects. You can gill the gap with one solution. In comparisson: steel-fitted blocks need to be measured separately and machined for each gap height.

  • RotaChock® requires no heating; heat could influence the alignment target negatively. Epoxy resins need to be heated to cure, and steel-fitted blocks need to be welded to the foundation.

  • RotaChock® competitive edge is its large footprint: the surface area of the bottom ring in contact with the foundation is larger, so the pressure exerted on that surface is lower. RotaChock® also uses a buttress thread design. These features allow RotaChock® to carry greater loads.

In erster Linie halten wir RotaChock® aus den folgenden Gründen für die beste Lebenszykluslösung für rotierende Geräte:

  • RotaChock® eliminiert Soft-Foot
  • RotaChock® ist einstellbar, so dass eine Ausrichtung und Neuausrichtung jederzeit möglich ist
  • RotaChock® spart Zeit und Geld im Vergleich zu anderen Verkeilungsoptionen

    Millionen von verstellbaren Unterlegkeilen sind bereits installiert und werden in Prestigeprojekten von der Schifffahrt bis zur Atomindustrie eingesetzt. Sehen Sie sich unser Portfolio an und treffen Sie die fortschrittliche Entscheidung, die Lücke mit RotaChock® zu schließen.